BRAKE MASTER CYLINDER (Humber Super Snipe) (Ser.4, 5 & 5a) (** From 1962- 67**)

BRAKE MASTER CYLINDER (Humber Super Snipe Parts) (Ser.4, 5 & 5a) ( From 1962- 67)

See Description.

Description

Here's a new Brake Master Cylinder Assembly (7/8" / 0.875") for the following models from Humber -

HUMBER

Humber Super Snipe (Ser. 4, 5 & 5a) (** From 1962- 67 **)

(Ch. 882000001 Onwards)

(** Not for earlier Super Snipes because they had a Built In Reservoir rather than a separate Remote Supply Tank like this one**)

Don't buy this thinking all Humber Snipes / Pullmans / Sceptres & Imperials are the same - THEY'RE NOT.

The Rod is not included - You can use your old one, it's only held in place by a circlip - So it's easy to swap.

Note -

Where the Push Rod goes into the Master Cylinder the end of the rod is Ball shaped .

Sometimes there's also a 1cm pin sticking out from the Ball. That pin is meant to go into a hole drilled in the Master Cylinder's piston.

This Master Cylinder does not have the hole drilled in it's piston - So you'll need to saw that pin off you have it.

Note -

Where the Push Rod goes into the Master Cylinder the end of the rod is Ball shaped .

Sometimes there's also a 1cm pin sticking out from the Ball. That pin is meant to go into a hole drilled in the Master Cylinder's piston.

This Master Cylinder does not have the hole drilled in it's piston - So you'll need to saw that pin off you have it.

No Text Messages or Emails please

Contact is by Phone Call Only

01580 753246 or 078950 52973.

Shipping

Where does Mev Spares ship to?

We deliver to Europe and North America and many other countries
For a comprehensive list of all the place that we deliver to click here

Shopping costs

Shipping cost vary depending on where you are in the UK or elsewhere in the world.
The shipping costs of your order are combined to keep the costs reasonable, and are calculated automatically as you check out
Once you have provided your address we can show you the cost.

Splitting orders

We don't split orders up. If there is a delay for a part to arrive as the warehouse, we will hold the order until its all ready to go together

How long before you ship?

Typically we will send your order the same day that you pay for it.

You may also need

BRAKE MASTER CYLINDER (Humber Super Snipe Parts) (Ser.4, 5 & 5a) (** From 1962- 67**)

Wholesale prices available

Where does Mev Spares ship to?

Shopping costs

Splitting orders

How long before you ship?

You may also need

AIR FILTER (Triumph Herald) (1200 & 1300) (1961- 71)

AIR FILTER (Triumph 1300FWD Saloon) (**Single Carb**) (** 1965- 67 Only **)

** FRONT ANTI ROLL BAR MOUNTS BUSHES x2 (Jaguar S Type) (1999- )

FRONT ANTI ROLL BAR MOUNTS BUSHES x2 (JAGUAR XJ8)

FRONT ANTI ROLL BAR LINKS x2 (Triumph Herald & Vitesse) (1959- 71)

FRONT ANTI ROLL BAR LINKS x2 (Triumph Stag) (1970- 77)

FRONT ANTI ROLL BAR LINKS x2 (Triumph 2000 & 2.5 Saloon) (1963- 77)

FRONT ANTI ROLL BAR LINKS x2 (Reliant Scimitar) (** See Picture **)

LOWER BALL JOINT x1 (Triumph Stag) (1970- 77)

LOWER BALL JOINT x1 (Triumph 2000 & 2.5 Saloons) (1963- 77)

BRAKE MASTER CYLINDER (Humber Super Snipe Parts) (Ser.4, 5 & 5a) ( From 1962- 67)

AIR FILTER (Triumph 1300FWD Saloon) (Single Carb) ( 1965- 67 Only )

FRONT ANTI ROLL BAR LINKS x2 (Reliant Scimitar) ( See Picture )